Road bitumen + polymer = Polymerized bitumen
POLYMERIZED BITUMEN + aggregate = ASPHALT
Bitumen for roads + POLYMER PB25 + aggregate = ASPHALT
The complete process of asphalt production is done in one place, with the use of ordinary road bitumen (instead of polymerized bitumen), with significant benefits:
The revolution was made possible by Polymer PB25
Polymer PB25 is an environmentally friendly plasticizer based on polyolefins such as PELD (low density polyethylene) and PP (polypropylene). During the chemical process with bitumen and aggregate, it creates its own mesh structure inside the asphalt and thus makes it stronger. Contains natural wax, which protects the asphalt from the weather and extends its shelf life.
Can be used for all asphalt mixtures: basic, binder and abbey. The shape of the flakes allows easy dispersion and mixing at normal production temperatures. It takes 20 seconds to melt the polymer to a minimum temperature of 160 ° C (optimally 170 ° C)
It is added with an automatic dispenser, directly in the asphalt mixer during the production of the asphalt mixture, in the amount of 0.25% in the upper bituminous layers and 0.30% in the load-bearing layers.
Polymer PB25 has passed numerous tests:
University of Bologna (Italy);
University of Cosenza (Italy);
GeRoad Laboratory (Italy);
Labing Laboratory Skopje (North Macedonia).
Based on the results of laboratory tests of asphalt mixtures AB11, comparing the asphalt mixture with standard bitumen for roads BIT 60 (B 50/70) and the mixture with the addition of polymer flakes PB25, it can be concluded that the addition of 0.3% polymer the asphalt mixture achieves the following improvements:
In practice, with the use of this polymer, among others, are built:
New advancing technologies are usually more expensive, but not in the case of PB25 polymer. During the usual production of AB11S asphalt (5.7% bitumen), 57 kg of polymer bitumen per 1 ton of aggregate are used. When using PB25 polymer for making asphalt AB11S (5.7% bitumen), 57 kg of ordinary bitumen are consumed per 1 ton of aggregate, with 3 kg of polymer consumed.
Еxcluding the savings obtained as a result of keeping the polymerized bitumen in a liquid state, direct savings are achieved during the production of asphalt. For an accurate calculation of savings, as well as for any other questions, you can contact us by e-mail or by phone.