DESCRIPTION POLYSTAB NANO is a stabilizing product that allows the creation of ecological and recyclable earth foundations. Due to its excellent binding properties, it can be used both in the consolidation of sandy and clay soils, as well as in the presence of different types of aggregates, it allows the […]
asijata
14 posts
DESCRIPTION Polymer in pellet format (or granule if required) with a polyolefin base able to modify the characteristics of the bituminous conglomerate directly during the production phase, it allows to reach high increments of the physical mechanical characteristics of the conglomerate without modifying the production parameters, since the polymers used […]
DESCRIPTION Cellulose-based fibers stabilize mixtures with high bitumen content, while improving mechanical properties. The specific composition of FB50 fiber and the pellet format allow the fibers to be easily dosed, homogeneously dispersed and mixed well during the production phase and facilitate its processing to avoid bitumen separation. USE FB50 fibers […]
DESCRIPTION Nano regenerator is used to make cold asphalt for road maintenance in winter, using 100% recycled asphalt (RAP). The service life of the filled parts (recovered holes) made by this cold procedure is from one to two years. USE Nano regenerator enables the creation of ideal cold asphalt for […]
DESCRIPTION Flux VE is an environmentally friendly product for making cold asphalt, for winter road maintenance. Cold asphalt is produced in a low temperature asphalt plant, by mixing bitumen, selected aggregates and Flux VE, which guarantees cold workability. After filling the hole with cold asphalt, the road is immediately passable. […]
DESCRIPTION Asphalt paint is a red pigment powder based on high yield synthetic iron oxide. Used for painting asphalt for pedestrian areas, sidewalks, bicycle paths, parking lots, emergency paths, etc. USE Can be used in any type of asphalt. It’s highly degradable composition enables the production of colored asphalts without […]
DESCRIPTION Modifying additive for bitumens based on glycerophospholipids able to modify the characteristics of bitumen, allows to reach high increases in physical and mechanical characteristics, enhances the elastic behavior even at high temperatures and increases adherence between bitumen and inert. The high compatibility of POLYCYKLE PK LL allows it to […]
