POLYGEN NANO

DESCRIPTION

Descriptive card for the production of conglomerates made using 100% milled and products completely cold, without the need to heat the milled, for the realization of a cold conglomerate ideal for road maintenance.

APPLICATION

POLYGEN NANO allows the creation of an ideal cold conglomerate for maintenance road formed from 100% milled.

METHOD OF USE

POLYGEN NANO is dosed directly to the milled (with maximum recommended grain size of 8 mm) and mixed until a homogeneous dispersion of the additive. The conglomerate thus produced it can be bagged or stored in storage.

DOSAGE

The average dosage of POLYGEN NANO ranges from 1.5% to 2% on the weight of the milled material, it is possible increase the dosage of POLYGEN NANO in case of very old milled and therefore particularly oxidized. When increasing the dosage of POLYGEN NANO increases the possible storage time of the conglomerate product.

STORAGE

POLYGEN NANO can be stored for 24 months in its original and closed packaging at a temperature
between 5 ° C and 30 ° C. Depending on the storage temperature the product may vary viscosity, however its characteristics are not compromised.

SAFETY

For more information on classification, protection measures and measures in case of fire, see the product safety data sheet, available upon request.

WARNINGS

Advice on how to use it corresponds to the current state of our knowledge and not imply the assumption of no guarantee and / or responsibility on the final result of the works.